Setting new standards in charger performance! Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe (GPMM3151), the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps! Features For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries Includes built-in balancer for up to 6S packs Fast charge up to 8 amps Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included) 0.1-8.0A adjustable charge current Precision peak detection with adjustable sensitivity for NiCd and NiMH batts Constant current / constant voltage charge method for Pb and lithiums Temperature sensing capabilities (GPMM3151 Thermal Probe available separately) Top-off charge feature fully charges NiMHs without overheating 0.1-3.0A adjustable discharge current Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and lithiums Perform 1 to 10 cycles (NiCd/MH only), and recall all data Configure up to 10 batteries in memory for instant, easy recall and charger set-up Banana plugs on DC input, and includes mating alligator clips Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages Audible sound cues aid in programming and notification of function changes. Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection     DC input makes the Triton2 EQ portable; a compact, built-in switching AC power supply makes it handy for indoor charging as well.   Balancing capability for up to 6S lithium packs is built in, so it's equally useful for the smallest indoor fliers as well as big outdoor aircraft.   Not only is the LCD reversed with a backlight, it also features a 0-45 degree adjustable view angle for easy reading. Stock number: GPMM3156 Download the manual (715 KB PDF) AC input voltage: 110V 60Hz -- 240V 50Hz DC input: 11-15.0V, banana plugs with mating gator clips Number of outputs: one Battery types, # cells: 1-24 NiCd, NiMH (1.2-28.0V) 1-6 LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells) 6, 12, 24V Pb (2V per cell) Fast charge current: 0.1-8.0A linear NiCd, NiMH, auto mode 0.1-8.0A for lithiums and Pb (120W max DC, 100W max AC) Fast charge termination: peak detection for NiCd, NiMH cc/cv for Pb and lithiums optional thermal cutoff for all battery types Fast charge safety timer: 0-990 minutes Discharge current: 0.1-3.0A Discharge cutoff voltage: 0.5-1.2V per cell NiCd/NiMH 2.8V per cell LiPo/Li-Ion 2.5V per cell LiFe 1.8V per cell Pb Battery memories: ten Programming controls: dial, 2 pushbuttons Display type: 2x16 reverse LCD w/backlight and adjustable angle Audible indicators: 10 melodies, on/off Case material: aluminum and ABS plastic Thermal cutoff: 50-150°F (10-65°C)** Safety devices: solid-state overload Cooling fan: built-in Case size: 7.2 x 7.0 x 2.4 in (184 x 178 x 62 mm) Weight: 39.4 oz. (1116g, w/o AC power cord) NiCd/NiMH Specs Trickle current: 0-300mA Peak sensitivity: 5-20mV NiCd/3-15mV NiMH Peak delay at start: 0-60 minutes Cycle count: 1-10 cycles Cycle delay: 1-60 minutes Maximum charge cap: 0-9900mAh NiMH top off charge: 0-1000mA Lithium Specs Balancing accuracy: 5mV per cell Balancing connector: FlightPower and ElectriFly adapters included Maximum node current: 300mA **GPMM3151 Triton Thermal Probe sold separately * requires optional Thermal Probe (GPMM3151) AMA Safety Recommendation

select picture